Dal nostro blog

Differences between PETG and PLA in FDM 3D Printing

Differences between PETG and PLA in FDM 3D Printing

In general, the choice between PETG and PLA depends on the specific needs of the 3D printing you intend to make. If you want greater impact resistance, flexibility and chemical

Per saperne di più
PETG 3D Printing in FDM

PETG 3D Printing in FDM

Longer FDM 3D printers are capable of printing PETG with high quality. This type of material offers many advantages, as it can be printed as easily as PLA but is

Per saperne di più
FDM 3D Printers – 24V vs 12V

FDM 3D Printers – 24V vs 12V

FDM 3D printers on the market usually work at 12V or 24V. The choice is made based on the characteristics of the product, the type of user to whom it

Per saperne di più
Hotend Replacement for Longer FDM 3D Printer

Hotend Replacement for Longer FDM 3D Printer

While using an FDM 3D printer, you may need to replace the Hotend. In fact, a little space between Heatbreak and Nozzle, or a failure of the Heatsink fan, or

Per saperne di più
Hotends comparison - MK8 vs V6

Hotends comparison - MK8 vs V6

The Hotend is the part of an FDM 3D printer that deals with the melting and deposition of molten plastic material. Therefore a Hotend is composed of a Nozzle that

Per saperne di più