How to Use TF Card Offline Mode for Engraving

1. First, save the engraving GCode file to the TF card in .gc or .nc format. You can use LightBurn to design the pattern you want to engrave, then save the GCode to the TF card.

2. Insert the TF card into the Ray5 control box, click File to enter the TF card file list, select the GCode file you just imported, and enter the engraving preparation interface. Click Frame to confirm the engraving area, then click Engrave. The interface differs slightly between the new and old versions of Ray5.

1）Old version Ray5:

2) New version Ray5: