How to Use LaserBurn PC Software with Ray5 mini for Engraving

This guide explains how to use the LaserBurn PC software to perform engraving with the Ray5 mini. It covers software download, device connection, file import, parameter setup, and engraving steps.

Steps

1. Software Download

First, go to the Longer official website to download the LaserBurn PC software. Install it and then open the software.

2. Device Connection

After opening the software, click "Device" to connect the machine. In the pop-up window, select the Ray5 mini image and click "Confirm". Then choose the correct port and click "Connect". When "Ray5 mini" appears in the device window, the connection is successful.

Import File and Start Engraving

Click the icon in the upper left corner and select "Import" to load the image to be engraved into the software. Then click the layer option and double-click the corresponding layer to modify the engraving parameters and confirm.

Before starting engraving, click "Reset" on the machine, then click "Engraving". Click "Border" to confirm the engraving position, and finally click "Start Engraving".

Conclusion

By following the above steps, you can successfully complete engraving with the Ray5 mini using LaserBurn PC software. Proper device connection, parameter setup, and positioning ensure accurate and efficient engraving results.