Wi-Fi Connection Failed

1. Weak Wi-Fi Signal
In LightBurn or LaserGRBL, enter $wifi/listAPs in the console to search for available Wi-Fi networks.
In the list of detected Wi-Fi networks, the number shown after SIGNAL represents signal strength, with 100 being the strongest.

If the signal is too weak, the connection may fail.
Possible causes and solutions:

The Wi-Fi antenna on the motherboard may be loose. In this case, remove the front beam cover of the RAY5 mini and reconnect the antenna securely.

The antenna may be damaged. If so, replace the antenna with a new one.

2. Wi-Fi Frequency Band Is 5 GHz Instead of 2.4 GHz
The Longer laser engraver can only detect 2.4 GHz Wi-Fi networks.
If your Wi-Fi is using the 5 GHz band, the machine will not be able to find or connect to it.

3. Incorrect Wi-Fi Name or Password
Check carefully to ensure that the Wi-Fi name (SSID) and password are entered correctly.

Mini:MiniS: