“Cut May Exceed Boundaries” Warning — Nano Troubleshooting

The “Cut may exceed boundaries” warning indicates that the engraving job exceeds the defined working area of the machine. This is a protection mechanism designed to prevent the laser from moving beyond its physical limits, which could result in positioning errors or potential damage.

This issue is typically caused by incorrect pattern placement or oversized designs. The following sections explain the common causes and how to resolve them.

1. Pattern Position Exceeds Engraving Area

If the pattern is placed outside the valid engraving area, the system will trigger a boundary warning.

To resolve this issue, adjust the position of the pattern on the canvas so that it is fully within the workspace.

LightBurn

Change the XPos and YPos parameters in the top menu bar.
Adjust the values until the design is positioned completely inside the working area.

LaserBurn

Adjust the X and Y parameters under Position in the top menu bar.
Ensure that the entire design falls within the machine’s engraving boundaries.

2. Pattern Size Exceeds Engraving Area

If the dimensions of the pattern are larger than the available engraving area, the system will also display this warning.

To resolve this issue, resize the pattern so that it fits within the workspace.

LightBurn

Adjust the Width and Height parameters in the top menu bar.
Scale the design proportionally if necessary to maintain correct proportions.

LaserBurn

Modify the W and H parameters under Size in the top menu bar.
Ensure that the final dimensions do not exceed the machine’s maximum engraving range.

Conclusion

The “Cut may exceed boundaries” warning is caused by either incorrect positioning or excessive pattern size. By adjusting the position and dimensions of the design within the software, users can ensure that the engraving job remains within the valid working area.

Proper layout planning and verification before starting the engraving process will help avoid this issue and ensure smooth and accurate operation.