Ray5 MiniS Third Axis Setup Guide: Using LaserBurn App with Roller & Chuck for Precise Laser Engraving

Introduction

The Longer Ray5 MiniS Laser Engraver (or Ray5 Mini), when paired with the third axis accessory, allows users to engrave cylindrical objects or perform specialized rotary work with precision. Using the LaserBurn mobile app, operators can control either a chuck or a roller, expanding the machine’s capabilities and enabling more complex laser engraving projects. This guide walks you through connecting the device, configuring the third axis, and preparing your materials.

Steps

1. Tap  to enter the device list.

2. After successful connection, tap the gear icon at the bottom right of the machine card.

3. Third Axis Settings – default is off. Choose Chuck or Roller based on actual usage.

• Chuck requires setting the diameter.

• Roller does not require diameter settings.

4. After setup, add materials in the creation interface. Since the system uses absolute coordinates, place the material at the bottom left corner.

Chuck

Roller

Note: The third axis will automatically turn off if the power is disconnected or the device is disconnected. The chuck’s working area changes according to the diameter setting, while the roller has a fixed, long working area. 

Conclusion

By correctly setting up the third axis, users can expand the functionality of Longer Ray5 mini/miniS Laser Engraver, enabling cylindrical and long-format engraving with precision. Always ensure the device is connected and the third axis is configured before starting your project to achieve optimal results.