How to Clean the Laser Window Lens and Nozzle on Ray5 mini/miniS

1. Disconnect the laser cable, loosen the M3*14 or 7-shaped thumbscrews, and remove the laser module.

Ray5 mini/miniS 2.5/3.5W 

Ray5 mini/miniS 5.5/10W

2、Use a 2mm Allen wrench to loosen the four mounting screws and remove the nozzle. For the 2.5W/3.5W laser heads on the Ray5 mini/miniS, the nozzle is magnetic and can be removed directly.

3、Moisten a microfiber cloth or paper towel with alcohol, and wipe the laser window lens and the acrylic part of the nozzle.

4、After cleaning, reinstall the nozzle onto the laser. Note: the side of the nozzle with the notch should face the back of the laser.Mini:

MiniS: