Trending searches
Popular products
Chariot ($0)
Chariot ($0)
Longer B1 adopts a mainboard characterized by wireless technology, microSD card reading, touchscreen display with graphic interface (you can buy it separately) and total interaction with your smartphone through the MKSLaser application.
Thanks to wifi connectivity, it’s possible to interact with the machine directly from the smartphone or a laptop web browser, and this is much useful specially in absence of the touchscreen display. In this way, it’s possible send gcode files from laptop/phone to machine’s microSD wireless, move the laser module, power on/off the laser beam & air assist, and so on.
In order to use Longer B1 in wifi, it’s necessary for first to complete the wireless configuration. For this purpose, it’s necessary to install the software MKS Laser Tool, which is usually provided by factory inside the microSD together the machine, however often the version V1.1.2 doesn’t work with some recent routers. To fix this problem, it’s possible install the latest version of the software, which can complete the configuration without errors.
V2.1.5 download: https://drive.google.com/file/d/1KXFudeke1sTATLbbrk4EyCvNW9mEteq7/view?usp=sharing
Once installed successfully, run the software as administrator. Then, choose “WiFi Configuration Tool”.
In the next window, select the right COM port, add the name & password for own router and wait for the connection success. Once it’s done, Get IP and note it for future usage.
Note: The IP address of Longer B1 may change frequently, so it is recommended that you set an IP RESERVATION for the Mac-Address of B1 within the DHCP parameters of your Router/AccessPoint, so that you always get the same IP address at each subsequent connection. Otherwise, it could be necessary to repeat the procedure above each time to get always the new casual IP address.
Once the procedure above has been completed successfully, it’s possible to connect the laptop/phone to the same wifi router, in this way it’s possible start to command Longer B1 via wifi.
Using a laptop, it’s enough digit inside the bowser the IP address got before. For smartphone, it’s possible to download MKSLaser for Android/iOS smartphones.
MKSLaser allows you to move the laser within the work area, switch the laser beam on and off, define the homing position, transfer files, start an engraving, monitor engraving information, enable air assist and so on. Thanks to MKSLaser, your Smartphone becomes not only a remote display for Longer B1, but also a powerful device for processing your work.
After downloading MKSLaser, first make sure that your smartphone and B1 are connected in the same local network. Verify the IP address assigned to B1 and enter the same IP in the application. After the connection is successful, remote use can be operated.
The MKSLaser Home screen shows at the top the current X/Y coordinates and the S intensity of the laser, while at the bottom there are four large buttons to access the corresponding submenu:
It allows you to process an image and slicing for engraving, exactly as you do when using desktop Lasergrbl / Lightburn, in an easy and comfortable way from your smartphone.
It allows you to move the laser module within the processing area and different steps and speed of movement can be set; you can also go back to homing, define a new homing position, turn the laser beam on and off, etc.
There are some graphic samples to be used to determine the best parameters for engraving on different materials. Once you have chosen the image to carry out the various tests, set the various parameters (refer to the "Creation" paragraph).
The list of files on the microSD card inserted inside Longer B1 is shown, and you can select a file to engrave.
!