LONGER How-to: Achieve Optimal Focusing with the LONGER Nano Series Using the Rotary

LONGER How-to: Achieve Optimal Focusing with the LONGER Nano Series Using the Rotary

ABSTRACT

Welcome to our friendly guide on using the LONGER Nano series engravers with the rotary clamp! Getting the right focus is key to preventing any blurriness or distortion in your engraving patterns. Let’s dive in and explore how to quickly and accurately adjust the focus when using the Nano Pro 12W alongside the rotary clamp.

CONTENTS

Connect the Machine and Switch to Rotary Mode

Secure the Material and Level It

Adjust the Focus

Conclusion

1) Connect the Machine and Switch to Rotary Mode
First things first! Make sure your Nano series engraver is properly connected. In the control console, simply click on “Switch Rotary Extension” to switch it to rotary mode. Easy peasy!

2) Secure the Material and Level It
Once your software is ready to go, it’s time to use the rotary clamp to hold your material securely. Just be mindful not to over-tighten the clamp or insert it too deeply. The material should rotate smoothly when you turn the clamp. Position your material centrally between the support rollers. To ensure everything is perfectly level, place a level on top of the material and adjust the support height until the bubble is centered. This will help you avoid any distortion in your engraving.