Trending searches
Wagen ($0)
Wagen ($0)
ABSTRACT
When engraving curved surfaces with the Longer Nano series, including the Nano Pro 12W, chucks are used to secure cylindrical objects for rotational engraving. If the chuck is not properly adjusted, vibrations may occur during engraving, which can distort the design. This guide provides essential steps for avoiding vibrations when using chucks on the Nano Pro 12W.
1) Control Clamping Pressure
Ensure the clamping pressure is moderate when using chucks to grip the material. Excessive clamping can damage the material or deform the chuck, affecting the engraving process. On the other hand, if the grip is too loose, the material might shift or rotate unexpectedly, compromising engraving precision and quality. The grip should allow you to manually rotate the chuck while maintaining firm control over the material.