Replacing the Display Screen

1. Use an M5 hex wrench to loosen the screws securing the control box, then remove the control box.

2. Use an M2 hex wrench to loosen the screws on the back panel of the control box and open the control box.

3. Disconnect the cable from the display’s mainboard.

4. Use an M2.5 hex wrench to loosen the screws on the mainboard and remove the old display screen. Install the new display screen, secure it with the original screws using the M2.5 hex wrench, and reconnect the cable.

5. Close the control box, tighten the back panel screws with an M2 hex wrench, and reinstall the control box onto the machine.

6. Replacement complete.