Engraving Errors or Alarms — Ray5 10W / 5W

During the engraving process, your Ray5 machine may occasionally display alarms or errors. These alerts are typically related to limit switches, coordinate settings, or user operations.

This guide explains the most common causes of engraving errors and provides clear solutions to help you quickly resume normal operation.

Common Causes & Solutions

1. Manual Movement During Engraving

Cause:
Manually moving the laser head or gantry while the machine is engraving can trigger the limit protection system.

Solution:

• Avoid any manual interference during operation
• Always pause or stop the job properly before adjusting the laser position

2. Alarm After Pressing “Stop”

Cause:
Clicking the Stop button during engraving may trigger an alarm signal. This is normal system behavior.

Solution:

• No action required
• Simply reset or restart the job if needed

3. Overscan Triggering Soft Limits

When engraving an image or vector filling at the current position, if the overscan function is turned on, the soft limit may be triggered, and the engraving may not be possible. You need to change the coordinates to absolute coordinates. If you do not change the coordinate system, then reduce the pattern and put it in the middle, or turn off the overscan function.

4. Limit Switch Signal Abnormality (Homing Issues)

The machine continuously detects the signal of the limit switch, resulting in a zeroing abnormality. The solution is to confirm that the XY axis does not hit the limit switch after the XY axis completes zeroing.

Additional Tips

• Always verify coordinate mode and workspace boundaries before engraving
• Avoid placing designs too close to the edges of the working area
• Regularly inspect limit switches and wiring for reliability

Conclusion

Most engraving errors or alarms on the Ray5 are caused by limit triggers, coordinate misconfiguration, or normal operational behavior. By understanding these common scenarios and applying the appropriate fixes, you can quickly resolve issues and maintain smooth engraving workflows.

Proper setup and careful operation will significantly reduce the occurrence of alarms and improve overall efficiency.