How to Fix LaserBurn Connection Issues via IP on Nano Pro

If you are experiencing connection issues when using LaserBurn via IP with your Nano Pro laser engraver, the problem is usually related to network settings or device conflicts. Follow the troubleshooting steps below to quickly restore the connection.

1. Network Configuration

The Nano Pro and your computer must be connected to the same network for IP communication to work properly. If they are on different networks, the connection will fail.

How to fix:

• Ensure both devices are on the same Wi-Fi network
• Configure or verify the network settings via the machine screen or mobile app
• Restart the router or reconnect devices if needed

2. Device Already in Use

The Nano Pro only supports one active IP connection at a time. If the machine is already connected to another device or software, new connections will be blocked.

How to fix:

• Disconnect the machine from any other software or device
• Close any previously connected LaserBurn or LightBurn sessions
• Reconnect and try again

Conclusion

LaserBurn IP connection issues on Nano Pro are typically caused by network mismatch or multiple active connections. Ensuring both devices are on the same network and confirming the machine is not already in use will resolve most problems quickly.

For stable performance, always maintain a consistent network connection and avoid running multiple IP connections simultaneously.