Lasergravierer-Blog

Introduction

This document summarizes the common causes and solutions for CH340 driver installation issues on both Windows and macOS systems. It explains how to resolve problems related to system compatibility, driver conflicts, permission restrictions, USB cable issues, and security settings. It also provides methods to verify whether the driver is installed correctly and suggests alternative solutions if installation continues to fail.

By following the troubleshooting steps in this guide, users can quickly diagnose driver installation problems and restore normal communication between their device and computer.

Windows System

Common Causes and Solutions

1. System Compatibility Issues

Windows 10 and Windows 11 usually include a built-in driver for the CH340 chip. However, automatic installation may occasionally fail.

Solution

Download and install the latest driver manually from the official website:
https://www.wch.cn

Install the latest version of the driver package CH341SER.EXE.

2. Old Driver Conflicts

If an older version of the CH340 driver was previously installed, it may conflict with the new installation.

Solution

1. Open Device Manager.

2. Click View → Show hidden devices.

3. Expand Ports (COM & LPT).

4. Right-click any CH340/CH341 related devices and uninstall them.

5. Select Delete the driver software for this device if prompted.

6. Reinstall the latest driver.

3. Driver Signature Issues

Some systems, especially Windows 7 and certain Windows 10 configurations, may block unsigned drivers.

Solution

1. Restart your computer.

2. Enter Advanced Startup Options.

3. Select Disable driver signature enforcement.

4. Run the driver installer again.

4. Insufficient Permissions

Installing drivers requires administrator privileges.

Solution

Right-click the installer and select Run as administrator.

5. USB Cable or Port Problems

Some USB cables only support charging and do not transfer data. If such a cable is used, the device will not be recognized even if the driver is installed.

Solution

• Use a USB cable that supports data transfer.

• Connect the cable directly to the computer’s USB port (preferably USB 2.0).

How to Confirm the Driver Installation

1. Connect the Longer laser engraver to your computer.

2. Open Device Manager.

Under Ports (COM & LPT) you should see something similar to:

USB-SERIAL CH340 (COM3)

If this appears, the driver has been installed successfully.

If a yellow warning icon appears, the driver installation may have failed or there may be a driver conflict.

Alternative Solutions

If the driver still cannot be installed:

• Try using another computer to rule out system-related issues.

• Replace the adapter module with FT232 or CP2102, which often offer better compatibility.

macOS System

1. Check Whether a Driver Is Needed

Starting from macOS 10.13, the CH340 chip may sometimes be recognized automatically without installing a driver.

1. Connect your Longer laser engraver.

2. Open Terminal and enter:

ls /dev/tty.*

If you see a device such as:

/dev/tty.wchusbserial1410

The device has been detected successfully and no driver installation is required.

2. Install the Driver (If the Device Is Not Recognized)

Download the Driver

Official driver
https://www.wch.cn/downloads/CH341SER_MAC_ZIP.html

Open-source driver (recommended)
https://github.com/adrianmihalko/ch340g-ch34g-ch34x-mac-os-x-driver

The open-source version often provides better compatibility with newer macOS systems.

Allow System Extensions

During installation, macOS may display a message such as “System Extension Blocked.”

To allow the driver:

1. Open System Settings / System Preferences.

2. Go to Security & Privacy.

3. Under the General tab, click Allow for WCH Electronics Co., Ltd.

Restart Your Computer

After installation, restart your Mac so the driver can be loaded correctly.

Troubleshooting Common Issues

Driver Installed but No Port Appears

Open Terminal and run:

ls /dev/tty.*

Disconnect and reconnect the USB cable to check whether a new device appears.

Apple Silicon Macs (M1 / M2 / M3)

Many official drivers were originally designed for Intel-based Macs, which may cause compatibility issues on Apple Silicon devices.

For better stability, we recommend using the open-source driver from GitHub mentioned above.

Permission Restrictions on New macOS Versions

Recent macOS versions such as Big Sur, Monterey, and Ventura enforce stricter security policies for third-party drivers.

If the Allow option does not appear in Security & Privacy, you may need to:

1. Restart your Mac in Recovery Mode.

2. Temporarily disable System Integrity Protection (SIP).

3. Install the driver again.

Alternative Options

If you still cannot install the CH340 driver, you may consider these alternatives:

• Use an FTDI USB-to-serial module, which macOS supports natively without additional drivers.

• Use a Wi-Fi connection if your GRBL controller board supports wireless communication.

Nano Pro can be used for color engraving tests on stainless steel materials. By adjusting parameters such as power, speed, interval, and number of passes, different color effects can be achieved on stainless steel surfaces.

This article introduces the principles of stainless steel color laser engraving using Nano Pro, parameter testing methods, layered engraving workflow, and important precautions. By adjusting power, speed, interval, and passes, different color effects can be achieved on stainless steel surfaces.

1. Principle of Laser Color Engraving

The technical principle of color laser engraving varies depending on the material, but it mainly relies on two core methods: one is generating color naturally through oxidation reactions; the other is achieving the desired color effect through coloring agents.

For stainless steel color engraving, the technology is mainly divided into two categories. The first is that the laser beam instantly heats the metal surface, triggering physical or chemical reactions with the surrounding environment, thereby changing the surface color. The second is that the laser forms colored oxides on the metal surface or generates a transparent oxide film, producing various colors through thin-film interference effects.

By precisely adjusting key parameters such as laser power, engraving speed, interval, and passes, the reaction depth on the metal surface can be effectively controlled, achieving various color effects to meet different process requirements.

2. Stainless Steel Color Engraving Parameters

2.1 How to Test Different Color Parameters on Stainless Steel Using Nano Pro

The color engraving parameters in this example are based on the LONGER Nano Pro model, using stainless steel as the material.

With the "Material Test" function in LightBurn, the preparation of engraving parameter test files is greatly simplified. Users only need to enter the relevant parameter ranges in the "Material Test Generator" to automatically generate the test file. Key parameters include Power, Speed, Interval, and Passes. The combination of these parameters directly affects the final engraved color. By setting appropriate parameter ranges according to the material size, the corresponding test file can be generated.

The operation process is shown in the figure: first, start LightBurn, import the configuration file, select the correct serial port, and load the Nano Pro machine configuration. When the console displays "Nano Pro connected successfully," click "Laser Tools" in the toolbar to continue.

In the second step, after clicking "Laser Tools," select "Material Test." A matrix parameter setting interface will appear. Set the required matrix parameters in this interface. For Nano Pro, the recommended parameter range is Power 50%–100%, Speed 1000mm/min–3000mm/min, with an 11×11 matrix layout. After confirming the settings, click "Start" to begin the engraving test.

After completing the test, a color matrix will be generated. Users can select the desired color and find the corresponding power and speed parameters. The horizontal axis represents power, and the vertical axis represents speed. By matching the coordinates, the required settings can be determined.

2.2 How to Engrave a Color Artwork

Open LightBurn, click File → Import to load the layered image file, then connect to the Nano Pro machine.

After importing the image, perform layer processing on the vector graphic:

1) Select the vector section to be engraved.

2) Click the lower right corner and assign it to Layer 1.

3) As shown in the figure below, we set the butterfly section as a layer.

4) Then assign it to Layer 2.

5) Select the inner part of the butterfly.

6) Assign it to Layer 3.

After completing the layer separation, assign the corresponding color parameters to each layer. Once finished, start engraving to obtain the desired color result.

The final result is a blue butterfly.

3. Notes for Nano Pro Stainless Steel Color Engraving

3.1 Minimum Power

Important: When engraving stainless steel with Nano Pro, the power must remain above 50%. Power below 50% will result in very light coloration, mainly producing a single yellow tone. Engraving results are closely related to laser power, so precise adjustment is essential for achieving the desired color.

3.2 Minimum Stainless Steel Thickness and Surface Finish

During engraving, stainless steel plates that are too thin may deform due to heat accumulation. It is recommended to use stainless steel plates with a thickness of no less than 2 cm. Matte or brushed stainless steel surfaces are recommended for better engraving results. Industrial-grade or mirror-finish stainless steel is not recommended.

Common stainless steel surface finishes are shown below.

3.3 Ensure Level Positioning During Engraving

When using the recommended engraving parameters, ensure accurate laser focus and keep the Nano Pro machine level. Incorrect focus height will directly affect color uniformity and accuracy. Therefore, always calibrate the focus height before each operation.

Conclusion

By following the above methods, color engraving can be achieved on stainless steel using Nano Pro. Proper parameter testing, correct layer setup, and attention to power and material requirements are the key factors for obtaining stable color results.

Introduction

The Batch Fill function is designed to improve engraving efficiency by automatically identifying and copying a selected pattern onto multiple materials with similar contours. Using the camera to capture and recognize material outlines, the system replicates the design across all qualified objects in a single operation, ensuring consistent positioning and alignment.

Material Requirements

To ensure accurate recognition and proper batch placement, materials must meet the following conditions:

• All materials must be identical in shape, color, and material type.

  • Dimensional variation between targets must not exceed 10%.

  • Area variation must not exceed 25%.

• The material color must be clearly distinguishable from the background for accurate contour detection.
  

• Materials with highly reflective or glossy surfaces are not recommended.

• At least two or more materials must be fully visible and placed within the effective engraving area.

  • Minimum spacing between objects must be 5 mm.

• Material thickness must be less than 5 mm.

Precautions Before Use

• Ensure the camera function is operating properly before starting.

• Select the specific element(s) you want to batch fill.

  • The system will automatically remove any unselected elements before performing the batch operation.

• You must manually place the first pattern onto one material surface.

  • The batch fill process will replicate this pattern based on its position and angle.

• Keep the base plate clean, free of debris, dust, or scratches to ensure accurate detection.

Batch Filling Process

1. Place the Materials

1. Place materials of the same size, shape, and color on the base plate.

   • Maintain spacing greater than 5 mm between objects.

2. Ensure all materials are positioned within the effective engraving range.

• Figure 1: Correct placement

• Figure 2: Incorrect placement – objects too close together

• Figure 3: Incorrect placement – objects overlapping

• Figure 4: Incorrect placement – objects of different shapes

2. Capture Material Image

• Click Capture to take a photo of the materials and generate the contour outlines.

3. Set the Design Position

1. Create or import your design on the canvas.

2. Drag the design onto one material, ensuring it is fully positioned within the material boundary.

4. Batch Copy and Place Patterns

• Select the positioned design and click Batch Fill.

• The system will automatically detect the remaining material outlines.

• The design will be copied to each recognized object at the same relative position and angle.

5. Start Engraving

1. Adjust the appropriate material parameters.

2. Follow the normal engraving workflow.

3. Start the job to engrave all patterns on the canvas simultaneously.

Introduction

This guide explains how to use and calibrate the built-in camera function of the Nano Duo in LightBurn. Proper camera calibration ensures accurate visual positioning, improves engraving precision, and minimizes alignment deviations between the on-screen design and the actual engraved result.

Required materials: red cardstock, calibration card.

1. Open the LightBurn software, connect the Duo device, and then click Galvo Engraving Mode → BL 450 nm. (The connection is considered successful only if the following device information is displayed in the console.)

The above applies to versions below 2.0.00

The above applies to versions 2.0.00 and above.

2. Click Laser Tools → Calibrate Camera Lens in the upper left corner.

The above applies to versions below 2.0.00

The above applies to versions 2.0.00 and above.

3. Once you are on the Calibrate Camera Lens homepage, select USB Camera (the built-in camera).→ Standerd Lens→Next

The above applies to versions below 2.0.00

The above applies to versions 2.0.00 and above.

4. After proceeding to the next page, capture the images in the order of ①②③④ shown in the top left image, repeating this process nine times in different directions before proceeding to the next step of visual alignment. (If you proceed directly to visual alignment without performing visual calibration, engraving deviations may occur.)

Error demonstration: Overexposure, too bright

Correct demonstration

5. The following message indicates that the visual calibration operation has been completed. Please click "Align Camera" to enter the visual alignment page.

(1) The first method to access the visual alignment page

(2) The second method to access the visual alignment page

6. Remove the calibration card here, then select USB Camera (the built-in camera) and click Next.

7. In the parameter settings page, the necessary parameters to adjust are Fill Speed and Fill Power, as well as Line Speed and Line Power.7. After setting up, click Frame → Start, and then click Next when the sculpting is complete.

8. On this page, click Capture Image → Next.

9. Double-click the center point of the graphic in the order of 1, 2, 3, 4 until it looks like the second image, then click Next.

10. The following message indicates that the visual alignment operation has been completed.

11. Finally, verify if there are any obvious deviations, then return to the creation page→Window→Check Camera Control, and in the Camera Control page, select the camera module→Update Overlay

The above applies to versions below 2.0.00

The above applies to versions 2.0.00 and above.

12.Import the carving material, place it on the carving area in the canvas, and then click Frame (to confirm the carving position) → Start (to start carving).

13. After the carving is complete, click "Update Overlay" again to check if the carved position on the canvas matches the actual carved position. A deviation of 0.5-1 mm is normal. If the deviation is large, you need to repeat the visual alignment operation in step 7 above.)

Introduction

When connecting your device to the LaserBurn software via USB, connection failures may occasionally occur due to cable issues, driver conflicts, power management settings, or system compatibility problems.

This guide provides a structured, step-by-step troubleshooting process—starting from simple physical checks to advanced system diagnostics—to help you quickly identify the root cause and restore a stable USB connection.

Stage 1: Quick Check and Basic Troubleshooting

These steps are the simplest and most often overlooked, but they often resolve the issue.

1. Reseat the USB cable:

Unplug the USB cable, wait a few seconds, then reseat it, ensuring it is fully inserted.

Purpose: Eliminate a momentary poor contact or software handshake failure.

2. Try a different USB port:

Unplug the USB cable from the current computer port and try another one (for example, from the front panel to the back panel).

Purpose: Eliminate a single USB port failure or insufficient power.

3. Restart the device and computer:

Shut down and restart both the device and computer.

Purpose: Clears temporary system caches and driver errors, a universal solution for various esoteric issues.

4. Check the physical connection:

Check the USB cable for visible damage or bends.

Check the device's USB port for loose connections, foreign objects, or damage.

Purpose: Eliminate the most basic physical layer issues.

5. Check if the USB port is occupied.

Stage 2: Software and Driver Troubleshooting

If basic troubleshooting doesn't work, the problem may lie with the software or driver.

1. Check the Device Manager:

On Windows, right-click "This PC" -> "Manage" -> "Device Manager."

Check for devices with a yellow exclamation mark (!) or question mark (?), especially under "Universal Serial Bus controllers" and "Other devices."

Action: If you see an unknown device or your device with an exclamation mark, right-click it and select "Update driver" -> "Search automatically for driver." If that doesn't work, try "Uninstall device" and then restart your computer to allow the system to automatically re-identify and install the driver.

2. Disable the USB selective suspend setting:

This is a power-saving feature that can sometimes cause unstable connections.

Path: Control Panel -> Hardware and Sound -> Power Options -> Change plan settings -> Change advanced power settings -> Find "USB settings" -> "USB selective suspend setting" -> Set it to "Disabled."

3. Check power management:

In Device Manager, expand Universal Serial Bus controllers, right-click each USB root hub, select Properties -> Power Management, and uncheck "Allow the computer to turn off this device to save power." Repeat this step for all USB root hubs.

Stage 3: In-depth hardware and system troubleshooting

If all of the above steps fail, you may need to consider more complex issues.

1. Replace the USB cable:

This is a very common problem! Many USB cables only charge, not transfer data. Be sure to use the original cable that came with your device or a high-quality USB cable that's proven to transfer data properly.

2. Test on another computer:

Connect your device to another working computer.

Result Interpretation:

If it works on the other computer: The problem lies with your original computer (driver, system, hardware port).

If it doesn't work on the other computer: The problem is most likely with your device or the USB cable.

3. Check the system log (Windows):

Right-click "This PC" -> "Manage" -> "Event Viewer" -> "Windows Logs" -> "System."

Check for error or warning logs around the time you plugged in the USB device; these logs will provide more specific error codes.

4. Update the motherboard chipset and USB controller drivers:

Go to the official website of your computer brand or motherboard manufacturer to download and install the latest chipset drivers. This can fundamentally resolve USB compatibility issues.

Introduction

To improve editing efficiency and operational safety, the software provides two core features: Combine/split and layer lock/unlock.

The Combine/Split function allows multiple independent objects to be temporarily grouped into a single entity for unified operations or separated back into their original objects when needed. This is primarily used for batch transformations such as moving, scaling, and alignment.

The Layer Lock/Unlock function prevents accidental selection, modification, or deletion of objects on a specific layer while keeping the layer visible. It is typically used to protect completed backgrounds or reference content.

Both features use clear icons, explicit command names, and state-based dynamic interactions to ensure predictable behavior and reduce user error, especially in complex editing scenarios.

Function 1: Combine/Split

The purpose of this function is to temporarily bind multiple independent objects into a whole for operation or to disassemble the whole back into independent objects.

1. Icon and Text Design

• Combined icons: Icons that use two or more geometric shapes connected together.

• Split icons: Icons that use a graphic made up of multiple parts, with a clear visual cue of separation.

2. Directly use "Group" and "Split."

• Group: Combines selected objects into a single unit, making them easier to move and transform simultaneously.

• Split: Splits a grouped object into its original, independent objects.

3. Dynamic and Interactive Feedback

• Top-left menu: Right-click on a selected object to dynamically display menu items based on the selected object's status.

  • When multiple independent objects are selected, the menu displays "Combine."

  • When a grouped object is selected, the menu displays "Split."

• Changes after executing the command:

  • After executing "Combine," the control points of the selected objects disappear and are replaced by a unified control box.

  • After executing "Split," the unified control box disappears, and each sub-object's control points reappear.

• New User Guide: When the software is first launched or when entering the drawing module, a brief reminder card indicates that multiple objects can be "combined" for easier unified management.

Function 2: Layer Lock/Unlock

This feature prevents any accidental editing (selection, moving, deletion) of all objects on a specific layer while still maintaining their visibility and is commonly used to protect completed backgrounds or reference drawings.

1. Icon and Text Design

• Lock icon: Uses the classic closed lock icon. This is the universal lock/unlock symbol.

• Unlock icon: Uses the open lock icon.

2. Button/Menu Text

• Lock Layer: Locks the layer, preventing its contents from being selected or modified.

• Unlock Layer: Unlocks the layer, allowing its contents to be edited.

3. Dynamic and Interactive Feedback

• On-canvas behavior limitations: When a user attempts to click, select, or drag an object on a locked layer, no action is taken.

4) Back to LaserBurn, click Connect network at the bottom of the page, connect the phone to the same WIFI as the STA mode in the previous step, and wait for network configuration. When the connection is successful and the network process reaches 100%, click FINISH at the bottom to return to the device list interface.

Note: After the device is connected, when you click anywhere on the device list label, the machine will disconnect; conversely, if you click when the device is disconnected, the phone will automatically connect to the device

Using LightBurn layers is one of the easiest ways to perform engraving and cutting on wood in a single workflow. By assigning different settings to separate layers, you can engrave details first and then cut the final shape automatically without manually restarting the job. This method improves efficiency, keeps alignment accurate, and simplifies laser project management for beginners and experienced users alike.

Table of Contents

• What This Guide Covers
• Why This Process Matters
• Before You Start
• Requirements
• Precautions
• Step-by-Step Tutorial
• Common Problems and Solutions
• Tips for Better Results
• Frequently Asked Questions
• Final Thoughts

What This Guide Covers

This guide explains how to simultaneously engrave and cut on wood using LightBurn layers. You will learn how to:

• Separate engraving and cutting operations into different layers
• Assign different laser parameters to each layer
• Process both operations sequentially in one job
• Improve workflow efficiency and project accuracy

Quick Answer

To engrave and cut wood at the same time in LightBurn:

1. Create separate layers for engraving and cutting
2. Assign different colors to each layer
3. Use low power and fast speed for engraving
4. Use high power and slow speed for cutting
5. Run the job so LightBurn processes each layer sequentially

This allows both operations to complete automatically in a single workflow.

Why This Process Matters

Using LightBurn layers for engraving and cutting provides several important benefits:

• Keeps engraving and cutting settings organized
• Reduces manual setup time
• Maintains alignment accuracy between operations
• Allows complex projects to run automatically
• Improves workflow efficiency for wood projects

For wood signs, ornaments, keychains, decorative panels, and custom crafts, layer management is one of the most useful LightBurn features available.

Instead of running separate jobs for engraving and cutting, the laser machine completes both operations in the correct sequence during one session.

Before You Start

Before beginning, make sure your laser engraver is properly connected to LightBurn and fully calibrated.

Also ensure:

• The wood material is flat and securely placed
• The laser focus is correctly adjusted
• Proper ventilation is available
• The work area is free from flammable materials

Follow official machine specifications or instructions.

Requirements

You will need:

• A compatible laser engraver
• LightBurn software
• Wood material suitable for laser engraving and cutting
• A design containing engraving and cutting elements

The workflow applies to various LONGER laser engraver models including:

• Ray5 Series
• Nano Series
• B1 Series

Precautions

Before running the laser job, keep these safety precautions in mind:

• Never leave the laser machine unattended during operation
• Ensure proper airflow and smoke extraction
• Double-check power and speed settings before starting
• Verify that engraving layers run before cutting layers
• Test settings on scrap wood first when using unfamiliar materials

Incorrect layer order may cause the cut piece to shift before engraving is complete.

Step-by-Step Tutorial

Step 1: Separate Engraving and Cutting with Layers

Action

In LightBurn, create different layers for engraving and cutting. Each layer is represented by a different color, which helps organize the workflow.

For example:

• Use one color for engraving
• Use another color for cutting

Expected Result

Your design elements are separated into distinct layers that can each use independent processing settings.

Important Notes

Different colors in LightBurn represent different layers only for organization purposes. The color itself does not affect engraving performance.

A common example is:

• Blue layer for engraving
• Red layer for cutting

This makes it easier to visually identify each operation before starting the laser job.

Step 2: Assign Different Parameters for Each Layer

Action

Once the design is separated into layers, assign different laser parameters to each one.

For the engraving layer:

• Use low power
• Use fast speed

For the cutting layer:

• Use high power
• Use slow speed

Expected Result

The engraving layer produces surface details while the cutting layer cuts through the wood material.

Important Notes

Engraving and cutting require very different laser behavior:

Using separate layers prevents the need to manually adjust settings during the job.

If you are unsure about ideal settings for your material thickness or machine power, follow official machine specifications or instructions.

Step 3: Process Each Layer Sequentially

Action

Assign different colors to each layer so LightBurn can process them with their designated settings.

For example:

• Blue for engraving
• Red for cutting

Start the laser job after confirming the layer setup.

Expected Result

LightBurn automatically processes each layer sequentially using the assigned parameters.

The engraving operation completes first, followed by the cutting operation.

Important Notes

Layer order is important. In most workflows:

1. Engraving should happen first
2. Cutting should happen last

This helps prevent material movement after the part is cut free from the wood sheet.

You can use the Preview function in LightBurn to confirm the operation sequence before starting the machine.

Understanding How LightBurn Layers Work

LightBurn layers function like separate instruction groups within the same project.

Each layer can contain its own:

• Speed
• Power
• Pass count
• Tool mode
• Processing order

This makes it possible to combine multiple operations into one file without reconfiguring the machine between steps.

Typical examples include:

• Image engraving
• Text engraving
• Vector outlines
• Contour cutting

Advanced projects may contain several engraving layers plus one final cutting layer.

Recommended Workflow Order

For most wood projects, the recommended processing order is:

1. Internal engraving
2. Fine detail engraving
3. Border engraving
4. Final contour cutting

This workflow improves stability and helps maintain alignment accuracy.

Common Problems and Solutions

Tips for Better Results

Use Clear Layer Colors

Assign highly visible colors to different operations. This makes it easier to identify engraving and cutting paths quickly.

Preview Before Running

Always use the Preview function in LightBurn before starting the machine. This helps verify:

• Layer order
• Alignment
• Engraving paths
• Cutting paths

Test on Scrap Material

Wood species and thickness can affect laser performance significantly.

Before running a final project:

• Test engraving quality
• Verify cutting depth
• Check edge quality

Keep Cutting Last

Final contour cutting should normally occur after all engraving operations are complete.

This reduces the chance of movement or alignment issues.

Organize Complex Projects

For advanced projects, consider naming layers clearly, such as:

• Photo Engraving
• Text Engraving
• Border Cut
• Final Cut

This improves workflow organization and troubleshooting.

Frequently Asked Questions

Can LightBurn engrave and cut in the same job?

Yes. LightBurn allows engraving and cutting in the same workflow using separate layers with different parameters.

Why should engraving happen before cutting?

If cutting happens first, the material may shift after the part separates from the wood sheet. Engraving first helps maintain alignment accuracy.

What colors should I use for layers?

Any colors can be used. Common practice is:

• Blue for engraving
• Red for cutting

The colors are for organization only.

Do layer colors affect laser power?

No. Layer colors only help visually organize the project inside LightBurn.

Can I use multiple engraving layers?

Yes. LightBurn supports multiple engraving and cutting layers with independent settings.

What speed and power settings should I use?

The tutorial recommends:

• Low power and fast speed for engraving
• High power and slow speed for cutting

Specific values depend on your machine and material. Follow official machine specifications or instructions.

Can this workflow be used on materials besides wood?

Yes, LightBurn layer management can also be used for other laser-compatible materials. However, settings will vary depending on the material type.

What if the Cuts/Layers panel is missing?

In LightBurn, go to:

Window > Cuts/Layers

This will restore the layer management panel.

Final Thoughts

Using LightBurn layers to simultaneously engrave and cut on wood is an efficient and beginner-friendly workflow that simplifies laser project management. By separating operations into different layers, assigning independent settings, and processing them sequentially, you can complete detailed engraving and precision cutting in a single job.

This approach improves workflow efficiency, maintains alignment accuracy, and helps create cleaner, more professional laser projects with less manual intervention.

For best results, always verify layer order, preview the project before running, and follow official machine specifications or instructions.

Preface

This document introduces the operational procedures and precautions for performing 3D wood carving and relief engraving using the Nano Duo laser engraving machine. It covers laser equipment safety guidelines, material selection and preparation, software setup, and reference engraving parameters, aiming to help users quickly master basic 3D wood carving techniques and achieve consistent, high-quality results.

Important Safety Warning:

Operating laser equipment poses serious safety risks (fire, burns, irreversible eye damage).

Before operation, you must:

1. Wear specialized laser safety glasses.

2. Ensure the work area is well-ventilated.

3. Never leave the equipment unattended while it is operating.

4. Strictly follow all safety regulations provided by the equipment manufacturer.

equipment:

Laser Equipment: 20W 450nm Blue Diode Laser

Compatible Machine Model: Nano Duo (features 20W 450nm and 2W 1064nm dual lasers)

Compatible Laser Control Software: (e.g., LaserBurn, LightBurn, LaserGRBL) LaserBurn is recommended.

Framing Function: Uses real-time preview to better ensure accurate laser positioning for engraving.

Focusing Method: Uses dual red light positioning for quick and easy visual alignment of two points.

Air Assist System: (Air pump strongly recommended. Function: Blows away smoke and dust, reduces charring.)

Materials preparation:

Wood:  Light-colored hardwoods with even grain are recommended (basswood, cherry, maple, walnut, sapele), avoiding woods with excessive resin or dark colors (low blue light absorption). The thickness must be greater than the expected maximum engraving depth.

Test material: Small pieces of the same type of wood (for parameter testing)

software:

Laser control software (LaserBurn recommended): Import grayscale images, set layer engraving parameters.

LaserBurn operation:

1. Import Grayscale Image: Import the grayscale image into LaserBurn.

2. Set Working Area: Define the engraving size and position to match the actual workpiece.

3. Speed: Starting test value (Sapele wood): 8000-12000 mm/min (requires extensive testing). Slower speeds result in deeper engraving, but also increase the risk of overheating. (Parameters used in the work: 10000 mm/min)

4. Power: Starting test value: 70% - 100%. The actual engraving power is much lower than this. Higher power results in deeper engraving, but also increases the risk of charring. (Parameters used in the work: 80%)

5. Line Interval: Affects detail and efficiency. Starting value: 0.025mm - 0.1mm. Smaller intervals result in finer detail but longer processing time. (Parameters used in the work: 0.05mm)

6. Scan Angle: Usually 45 degrees or alternating 0/90 degrees. (Parameters used in the work: 0 degrees)

7. Multi-layer Engraving: From high to low or from deep to shallow. Increasing the number of engraving layers helps reduce charring. (Layers used in the work: 1 layer; more layers can be added depending on the required depth)

8. Image Processing: Increase contrast to make the engraving area clearer. (Parameters used in the work: Contrast 100%)

9. Simulation Preview: Use the software's simulation function to preview the engraving path and effect.

10. Border Preview: Ensure the engraving area is within the material area.

Example image:

Workpiece preparation and positioning

1. Clean the wood surface, ensuring it is smooth and even.

2. Securely fix the wood to the workbench.

3. Use a dual red laser pointer to precisely align the engraving material, ensuring the optimal focal distance from the surface.

(The optimal distance is 220mm; holding a ruler against the laser head is recommended.)

Adjustment strategies:

Engraving too shallow/lacking depth: Increase power/decrease speed/increase the number of layers.

Edges charred/overburnt: Decrease power/increase speed/increase air assist.

Details blurry: Check if the focal length is accurate/reduce the line spacing.

Uneven surface/streaks: Adjust the fill angle/optimize the line spacing.

Finely adjust the speed, power, line spacing, and layer parameters in the software based on the test results.

Perform engraving:

1. Reconfirm that safety measures are in place (safety glasses, ventilation, fire extinguisher, no unattended operation).

2. Activate smoke extraction and dust removal system and air assist.

3. Send the job to the laser controller via the software.

4. Monitor continuously: Closely observe the engraving process, paying particular attention to any open flames or abnormal smoke, and be prepared to press the stop button at any time.

5. After the engraving is complete, wait for the laser head to stop moving completely before turning off the equipment.

Post-processing:

1. Carefully remove the workpiece (it may be hot or covered in dust).

2. Use a soft brush or damp cloth (with caution) to remove surface dust.

3. (Optional) Sand, oil, wax, or paint as needed (especially on charred edges) to enhance the finish and protect the surface.

Works on display:

Original image      

 Sapele wood    

Solid wood

Core Concept: What are LightBurn layers?

You can think of LightBurn layers as transparent acetate sheets. Each sheet contains different graphics (such as cutting lines, engravings, marking lines, etc.), and each sheet is assigned different processing parameters (power, speed, number of passes, etc.). Finally, stacking all the sheets together creates a complete artwork, and the laser processes each layer in the order you set.

1. Location and Interface of the Layer Panel

1.1 Finding the Layer Panel

On the right side of the software interface, find the "Cuts/Layers" panel. If it's not visible, click Window > Cuts/Layers from the top menu bar to make sure it's selected.

1.2 Understanding the Interface

1. Layer List: Displays the name, color, status, and parameter previews of all layers.

2. Eye Icon: Controls layer visibility. Click to hide/show a layer.

3. Lock Icon: Locks a layer. Once locked, no objects on that layer can be selected or edited.

4. Color Block: Represents the display color of all objects on that layer (for onscreen differentiation only, does not affect actual engraving).

5. Parameter Bar: Displays the default processing mode (e.g., cutting, scanning/engraving) and key parameters (power, speed) for that layer.

2. Basic Layer Management

2.1 Creating a New Layer

When you import a file, a layer will be added.

• It's recommended that you name the new layer, such as "Cut Layer," "Image Engraving," "Vector Engraving," or "Marker Layer." Giving your layer a descriptive name is a good practice!

2.2 Setting the Current Working Layer

• In the Layers panel, click the layer you want to draw on. This layer will highlight, indicating it's the active layer.

• From now on, all new shapes you create using the drawing tools will automatically be placed on this active layer.

2.3 Setting the Layer Color

• After selecting a layer, you can select a new display color for it in the lower-left corner. This helps you quickly distinguish different layers visually.

2.4 Hiding and Locking Layers

• Click the "eye" icon to hide a layer. Hidden layers won't be engraved, making them ideal for temporarily shutting down certain processes or keeping backups.

• Click the "lock" icon to lock a layer. This prevents accidental selection or modification, which is very useful for complex shapes.

2.5 Deleting a Layer

• Select a layer and press Delete on your keyboard to delete it.

• Note: Deleting a layer will also delete all objects on that layer.

3. Setting Processing Parameters for Different Layers

This is the essence of layer management—assigning independent laser parameters to each layer.

3.1 Selecting a Layer: In the Layers panel, simply click the layer for which you want to set parameters.

3.2 Setting Parameters: The toolbar at the top of the software or the "Cutting/Engraving" parameter panel on the right will display the parameters for the currently selected layer.

3.3 Tool: Select a processing method, such as Cutting, Scanning (Engraving), Filling, or Image.

3.4 Power/Speed/Times: Set the desired process for the layer. For example:

• Cutting layer: Tool = Cut, Power = 100%, Speed = 200 mm/min, Times = 1
• Vector Engraving layer: Tool = Scan (Engrave), Power = 50%, Speed = 6000 mm/min, Line Count = 0.06 mm
• Image Engraving layer: Tool = Image, Mode = Grayscale, Power = 60%, Speed = 6000 mm/min, Line Count = 0.06 mm

3.5 Parameter Inheritance: All objects created on this layer will use these default parameters. You can also select individual objects and adjust them, which will override the layer's default settings.

4. Controlling the Processing Order: Layer Order

The laser machine's default processing order is top to bottom.

4.1 Adjusting the layer order: In the Layers panel, simply drag layers to change their top-to-bottom order.

4.2 Best Practice Order (generally):

• First: Internal engraving/shallow engraving (such as image engraving or fine text engraving)
• Middle: External engraving/deep engraving (such as a vector engraving border)
• Last: Cutting (Ensure all engravings are complete before removing the part from the material to prevent shifting)

5. Practical Workflow Example: Creating an Engraved Keychain

Suppose you want to create a wooden keychain that includes engraving a photo and cutting the outer edges.

5.1 Planning:

• This requires two steps: photo engraving and contour cutting.

5.2 Creating Layers:

• Import the file and create a new layer, name it "Photo Engraving," and set the color to blue.

• Import it again and create a second layer, name it "Contour Cutting," and set the color to red.

5.3 Setting Parameters:

• Select the layer, set the tool to Engraving and Filling, and set the appropriate power and speed (e.g., 60% power, 6000 mm/min speed).

• Select the "Contour Cutting" layer, set the tool to Cutting, and set the cutting parameters (e.g., 100% power, 200 mm/min speed).

5.4 Assigning Objects:

• Make sure the "Photo Engraving" layer is the active layer.

• On the "Contour Cutting" layer, draw the outline of the keychain (e.g., a circle or a custom shape).

5.5 Adjusting the Order:

• In the Layers panel, make sure the "Photo Engraving" layer is above the "Contour Cutting" layer. This way, the laser will engrave the fill first, then cut.

5.6 Preview and Export:

• Use the Preview function (computer icon) to check the results and order. You should see the blue areas engraved first, followed by the red areas cut.

• Click Engrave Directly to Device, and LightBurn will automatically export all layer data to the laser in the correct order and parameters.