Ray5 mini/miniS Laser Module Replacement

Different wattage laser modules use different mounting structures: 2.5W and 3.5W lasers are secured with plastic fixtures, while 5.5W and 10W lasers are mounted using metal sliders and dovetail slots.

1、Ray5 mini/miniS 2.5/3.5W

1.1、Remove the Old Laser
Unplug the laser cable, loosen the M3*14 hand screws, and remove the old laser module.

1.2、Install the New Laser
Align the plastic mount on the back of the laser with the X-axis frame, slide it down vertically, tighten the hand screws, and connect the laser cable.

2、Ray5 mini/miniS 5.5/10W

2.1、Remove the Old Laser
Unplug the laser cable, loosen the L-shaped hand screws, and take out the old laser. 

Loosen the screws on the back of the laser and remove the dovetail rail. Then install the dovetail rail onto the new laser.

2.2、Install the new laser:

 Align the dovetail rail on the back of the laser with the metal slider on the X-axis frame, slide it down vertically, tighten the thumbscrews, and connect the laser and its cables. Mini:

MiniS: