News

RSS
FDM printer bridging printing tutorial

FDM printer bridging printing tutorial

The FDM 3D printing consists of a series of layers of molten material placed on top of each other; in this way, complex objects are created through...
LONGER New Dual Blower Kit installation tutorial

LONGER New Dual Blower Kit installation tutorial

Last mont LONGER 3D release a new accessories for FDM 3D printers. This dual blower kit perfectly fit for LONGER LK4/LK4 PRO/LK1/LK5 PRO and compat...
How first layer calibration on a FDM 3D printer

How first layer calibration on a FDM 3D printer

The calibration of the first layer takes place by calibrating the distance between the tip of the nozzle and the surface of the printing plate; in ...
How to upgrade LK4 Pro into a mini LK5 Pro

How to upgrade LK4 Pro into a mini LK5 Pro

Our LONGER LK4 PRO and LK5 PRO 3D Printers are very similar, but the differences between them are not limited only to the different printing area, ...
Description in Longerware / Chitubox / Lychee

Description in Longerware / Chitubox / Lychee

By using the same Longer resin 3d printer but different slicer, what's the meaning of each parameter in slicing software?  We attached Longerware /...
LONGER LK5 / LK4 PRO firmware update

LONGER LK5 / LK4 PRO firmware update

1.Since the motherboard of the LK4 Pro, LK5 Pro printer is an open source motherboard, use electrical tape to paste the pins on the side of the USB...