News — LK4 PRO

RSS
FDM printer bridging printing tutorial

FDM printer bridging printing tutorial

The FDM 3D printing consists of a series of layers of molten material placed on top of each other; in this way, complex objects are created through...
LONGER New Dual Blower Kit installation tutorial

LONGER New Dual Blower Kit installation tutorial

Last mont LONGER 3D release a new accessories for FDM 3D printers. This dual blower kit perfectly fit for LONGER LK4/LK4 PRO/LK1/LK5 PRO and compat...
How first layer calibration on a FDM 3D printer

How first layer calibration on a FDM 3D printer

The calibration of the first layer takes place by calibrating the distance between the tip of the nozzle and the surface of the printing plate; in ...
LONGER LK5 / LK4 PRO firmware update

LONGER LK5 / LK4 PRO firmware update

1.Since the motherboard of the LK4 Pro, LK5 Pro printer is an open source motherboard, use electrical tape to paste the pins on the side of the USB...
LONGER Authorized Reseller in Iran

LONGER Authorized Reseller in Iran

Congratulation! We announce Azarin Tech is our official reseller in Iran country, Azarin Tech will present full products of LONGER, of which is inc...
LONGER LK4 PRO check by yourself guidelines

LONGER LK4 PRO check by yourself guidelines

Here's some videos to check on LK4 PRO if you face some setting problems or errors.  Quick Start - LK4 Pro How to Solve Printing Stopped after Pre...